Bug Net Patching Guide

How to repair damaged bug net mesh areas up to 2 inches in diameter using the Tenacious Tape Mesh Patch kit.


  1. Begin by cleaning the repair area with a damp rag to remove any dirt which may prevent a good bond. Trim any loose threads.
  2. Flatten out the fabric as much as possible, we like to use some smooth objects like glass cups to gently hold the fabric around the damaged area.
  3. Apply the Tenacious Tape patch over the rip, tear or hole.
  4. Smooth out any bubbles and ensure the edges lay flat. The adhesive will reach full strength after 24 hours.
  5. Repeat the above steps on the opposite side of the fabric. Ensuring the edge of the patch lines up with the first patch so it can bond through the mesh.
Back to blog